Puma 20 User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
Wheelchair settings | 13
101248-05_21
4 Wheelchair settings
The average wheelchair user does not exist. This is
why Handicare wheelchairs can be adjusted according
to the speci c needs of the user.
In this, we make a distinction between wheelchair
settings and wheelchair adjustment options. Settings
are carried out only once and must be executed by
quali ed specialists, unless explicitly stated otherwise.
Adjustment options can be carried out by the user.
These adjustment options do not require the use of
tools.
4.1 Seating system
The extensive settings with respect to the seating
system allow for optimum support of the body
(
Seating system). The following setting options are
possible:
1. Seat depth and seat width
2. Backrest angle
3. Armrest height
4. Lower leg length
4.2 Seat height
Depending on the speci c circumstances of the user
of the wheelchair the seat height can be set. Every
optional seat height lays within the 10˚ (17.6%)
maximum safe slope of according to EN12184 (2009)
ClassB. Lowering the seat height has a positive
in uence on the (dynamic) stability.
Warning!
Increasing seat height has a negative effect on dynamic
stability.
4.3 Centre of gravity setting
The wheelchair’s centre of gravity ( gure 6) can
be adjusted within the seating system (
Seating
system).
Caution!
Changing the wheelchair’s centre of gravity may
negatively in uence the wheelchair’s driving
characteristics and/or its dynamic stability.
Figure 6
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments